SVB Skipperprofil Harald B.
Dieses Profil ist auf privat gesetzt.
Harald B. hat noch keine Fragen gestellt.
Harald B. hat diese Fragen bereits beantwortet
1Eine Frage zu:
WiFi Antenne weBBoat LINK
Maximilian N. fragte
am 28.05.2021
Guten Tag, hat das Gerät einen SIM Karten Eingang? #74498#
2Eine Frage zu:
Ringanode Volvo Penta Saildrive 130/150 / zweiteilig
Falkmar W. fragte
am 04.11.2020
Welche Variante (Alu oder Zink) ist für die Gewässer rund um Rügen empfehlenswert (Liegeplatz Kröslin am Peenestrom; Fahrtgebiet hauptsächlich Boddengewässer Ost aber auch Urlaubstörn südliche und westliche Ostsee)
Antworten:
Harald B. antwortete
am 05.11.2020
Ich segele in Nord- und Ostsee und habe mich für Zink entschieden. Sie hält bei mir mehrere Jahre.
Michael H. antwortete
am 06.10.2021
Hallo.ich hatte mein schiff mehre Jahre an der Ostsee liegen und kam mit Zinkanoden sehr gut klar .Seit drei Jahren liegt mein schiff im Binnenrevier und hier macht sich als Opferanode eine Magnesiumanode besser .Das konnte man gut sehen ,da die erst montierte Zimkanode kam Fraß hatte.
Gruss Michael
3Eine Frage zu:
AXIOM 9 / Touch
Viktor R. fragte
am 05.02.2020
Good morning!
I have an old Raymarine system on a sailing yacht, built on SmartPilot S3, standard option on most yachts - autopilot, wind speed and direction indicator, depth, wind meter, GPS antenna, radio, MFD A65. On your website I bought Raymarine AXIOM 9. How to connect it to the system now? How to connect A65 and Axiom 9 in this system? Now all devices are connected directly to SmartPitlot, without the use of connectors and special wires. I still have AIS from Naviom. https://www.naviom.com Has WiFi but it would also be useful to connect it via cables (NMEA 2000, NMEA 0183).
Antworten:
Harald B. antwortete
am 05.02.2020
I have a Axiom 9. But it is connected via NMEA0183 gateway from Raymarine to my old SmartPilot system. Via this gateway the Axiom receives wind and AIS data fom the old bus system.
Viktor R. antwortete
am 05.02.2020
Thank you friend! What specific device do you use to connect Axiom and Smart Pilot? In one article, I read this: ... Is it possible to connect the SPX directly to a Plotter?
The Raymarine SeaTalkNG network is used to exchange data between instruments. Below an example of what is and is not allowed. Ensure that the network power supply is not displayed. The power supply can come from an SPX autopilot or from the switch panel.....
Bernd G. antwortete
am 05.02.2020
You will currently have two networks, a SeaTalk1 network and a NMEA0183 network. The S3 autopilot seems to act as an interface between these two systems. Your new Axiom9 no longer has these two interfaces; it has an NMEA2000 connector. You will probably be able to connect to your new plotter using the E22158 converter kit (Raymarine part number), which converts all SeaTalk1 data to NMEA2000. But the AIS receiver must be connected directly to the NMEA2000 network, because SeaTalk1 did not know the AIS data set yet.
Viktor R. antwortete
am 05.02.2020
May I ask you to send the connection diagram by e-mail? rakovets@gmail.com