SVB Skipperprofil WAYNE W.
Dieses Profil ist auf privat gesetzt.
WAYNE W. hat noch keine Fragen gestellt.
WAYNE W. hat diese Fragen bereits beantwortet
1Eine Frage zu:
Tef-Gel / Korrosions-Stopper
Joseph G. fragte
am 12.06.2019
Good Morning, I was hoping to purchase a tube of Tef-Gel (Item no. 61152) with some other items but have been advised that you do not currently ship it to Ireland. Do you have a similar product that prevents corrosion between stainless steel fixings and aluminium that you do ship to Ireland. If you do can you please advise on what it is?.
Many thanks,
Joeph Gilmartin
Antwort:
WAYNE W. antwortete
am 12.06.2019
Joseph, Tef-Gel is the best product for stopping corrosion between dissimilar metals. It does not dry out like the old Durolac. I have used it for 12 years with the first 6 years running a large aluminium motor yacht. I gather SVB can't supply Tef-Gel to Ireland due to some licencing arrangement. So there must be a distributor in Ireland. I would try to source it locally. It is expensive but a small bit goes a long way.
2Eine Frage zu:
Kugelfender / weiß
Lucien L. fragte
am 25.07.2018
Have purchased the SVB ball fenders but the valve seems odd. How do you inflate and deflate????
Antworten:
Khorobrov A. antwortete
am 25.07.2018
I do not have any problem with valve. 1 fender have small hole , I have sent foto to you month before
WAYNE W. antwortete
am 25.07.2018
Lucien, You need to remove the white plastic plug by unscrewing it using a large screwdriver then the fender can be inflated by pushing a nozzle into the whole and using a pump or compressor inflate the fender then refit the white plug. The valve appears to be a flat flap like you would find on a rugby or soccer ball. To deflate the fender remove the white plastic plug and insert a blunt small stick or similar which will open the flap valve and you can deflate the fender by pushing down on it.
3Eine Frage zu:
Rundkauschen ohne Tauwerk
Richard F. fragte
am 11.06.2018
44277 please can you tell me the safe working load as may be suitable for off-road winching
Antwort:
WAYNE W. antwortete
am 11.06.2018
The SWL of the 20mm ANTAL round thimble with a 6mm dyneema loop is 1600kg per the Antal.it website. These are not suitable for 4x4 winching if you are using wire cable. If you are using dyneema rope instead of cable they may be OK but the SWL is too low I would think. I would think you should go for a snatch block design with a SWL the same or higher than you winch cable andsuitable fro wire cable if that is what you are using on your winch.
4Eine Frage zu:
Klappbare Alu-Gangway BORKUM
Paul R. fragte
am 01.04.2018
Dimensions, length, width including the hand rail support brackets and the folded depth to the Borkum gangway. Plus the location dimension of the hand rail centre hole from the end. This is required to confirm rail fixings.
Many thanks
Paul
Antworten:
WAYNE W. antwortete
am 01.04.2018
The gangway is supplied with a deck fitting (socket and pin on gangway) not a handrail bracket.
Paul R. antwortete
am 02.04.2018
Picture shows two handrail brackets fixed to the side rail. To check whether it fits existing cradle I need width measurement including the handrail brackets and folded dimensions. Thanks